Is the Everlinx EVERARC R Series worth buying?
Take an EVERARC, put a battery inside, and you get the R Series: the same 0.5 to 20 joules in half-joule steps, the same 65-inch stylus and 3-year warranty, and no cord to the wall. Everlinx states up to 1,500 welds per charge under continuous use. It weighs 3.4 lb and cost $1,999 on November 13, 2026, $300 more than the corded welder's regular price. If you work festivals, farmers' markets or backyards, that $300 is cheap. If you work from a salon, it buys nothing, and the box still has no eye protection.
Buy it if
- Your events are outdoors or in venues that won't lend you an outlet
- You want the cleanest table possible: no power cord, no gas line
- You already own eye protection or will buy the EVERSHIELD with it
Skip it if
- You always weld near a wall socket: the corded EVERARC does the same for $1,549
- You want everything in one box: the Everlinx Starter Kit offers the R Series as a $300 option, with screen, chain and course
How far does a charge go?
Everlinx's figure is up to 1,500 welds per charge under continuous use. A bracelet is one weld when all goes well, two or three when a ring needs a second touch. Even at three welds a piece, that's a brand figure that would cover hundreds of pieces. Few pop-ups get near that in a day, so the practical point is simpler: charge it the night before and stop thinking about power.
That's worth more than it sounds. Some market organizers charge for electricity and others don't offer it at all. Extension cords cross walkways. With the R Series your table needs nothing from the venue.
What the page doesn't tell you is how the battery ages, how long a full charge takes, or what a replacement costs after the 3-year warranty. Those are the questions to send Everlinx before you pay.
Is it the best welder for pop-ups, then?
It's the only one that cuts the cord, but in our pop-up ranking it isn't first, and the reason is in the box. The R Series ships without eye protection and without training, at $1,999. The Pepetools Helix weighs 2 lb, includes shade 5 glasses and cost $1,499 that day. For a table with an outlet behind it, the Helix is the better buy.
The way to make the R Series whole is the EVERSHIELD. Everlinx sells the rechargeable welder with its dimming screen for $2,199, and inside the starter kit for $3,299 with chain and the course. If off-grid events are your plan, price one of those two, not the bare welder.
One detail for flyers: a welder with a built-in battery may fall under airline battery rules. Check with your airline before you pack it.
What's in the box?
The EVERARC R Series rechargeable welder, a 65-inch welding stylus, a custom pen holder, three tungsten tips, a tungsten tip cover, a grounding wire, the power cord for charging, a diamond sharpening bit and the user manual.
How do you set it up, and what should your first welds be?
Charge it fully first. Then connect the stylus and the grounding wire, fit a sharpened electrode and read the manual. With your own eye protection on, start at 0.5 joule on scrap rings and go up in half-joule steps. Before your first event, run a full practice session on battery alone so you know how the charge indicator behaves.
What does it really cost to start with it?
$1,999 in Everlinx's catalog on November 13, 2026, against a regular $1,699 for the corded welder ($1,549 on sale that day). Add eye protection (the bundle with the EVERSHIELD is listed at $2,199), then chain, jump rings, pliers and a leather patch. No argon, by Everlinx's own advice. That day Everlinx advertised $150 off eligible welders and bundles with no code needed: check on the page whether the R Series is included. Ask what a replacement battery costs: it's the one long-term cost the page doesn't show.
What do we like, and what should you know?
- Runs on its own battery: up to 1,500 welds per charge, says Everlinx
- Same 0.5 to 20 joule range in half-joule steps as the corded EVERARC
- Argon-free by design: nothing else to carry
- 3-year warranty and 30-day returns without a restocking fee
- 3.4 lb, hand-built in the USA
The catch: No eye protection in the box, like the corded model. The 1,500-weld figure is Everlinx's, for continuous use; your day will vary. Battery life over the years and the cost of replacing the battery aren't on the page. And you pay $300 for a feature that only matters away from power.
What protects your eyes, and do you need argon with it?
Nothing for your eyes comes in the box (no eye protection listed in the box; the EVERSHIELD screen is sold in the bundle), so order protection before your first weld. A pulse arc weld is a bright flash a few inches from your face, dozens of times a day. Sunstone's own guide says it plainly: "You don't necessarily need an auto-darkening lens, but you must use eye protection" (Sunstone, optics guide). For shade numbers, the reference is OSHA's eye protection standard, 29 CFR 1910.133, which asks employers for a filter shade matched to the work. Your client looks away or wears a pair too, and a leather patch sits between the chain and their skin.
Argon: runs argon-free: Everlinx cites a third-party strength test for welding without gas. Brands disagree on whether you need it at all. Everlinx says no and points to a tensile test on fine jump rings (Everlinx, argon page); Sunstone says shielding gas makes the weld cleaner and stronger (Sunstone, argon article). We lay out both sides in do you need argon for permanent jewelry. This isn't safety or legal advice: read your welder's manual first.
Everlinx EVERARC R Series specifications
| What you get | Welder only: chain, tools and a course are separate purchases |
|---|---|
| Power range | 0.5 to 20 joules in half-joule steps, cycle time under one second |
| Power steps | 0.5 J steps |
| Controls | Membrane buttons |
| Stylus | 65-inch welding stylus with a custom pen holder |
| Welder weight | 3.4 lb |
| Welder size | 182 × 132 × 72.1 mm (about 7.2 × 5.2 × 2.8 in) |
| Runs on | Internal rechargeable battery: up to 1,500 welds per charge under continuous use (Everlinx) |
| Argon | Runs argon-free: Everlinx cites a third-party strength test for welding without gas |
| Eye protection in the box | No eye protection listed in the box; the EVERSHIELD screen is sold in the bundle |
| Training in the price | User manual; Everlinx's course comes with the starter kit, not with the welder |
| Built in | Hand-built in the USA |
| Safety certification | Not stated on the pages we read |
| Warranty | 3-year warranty ("Everlinx Assurance") |
| Returns | Returns within 30 days for EVERARC welders and bundles (Everlinx refund policy) |
| Financing | Shop Pay installments, PayPal Pay Later or Everlinx layaway |
"Not stated": not on the pages we read on November 13, 2026. Every figure is Everlinx's own.
Why 8.4/10? The score, criterion by criterion
Each criterion is scored out of 10 from what Everlinx publishes; what isn't published scores 2. This product rounded to the same figure as the one ranked just above it; the published tie-break (lower price, then longer warranty) places it one step below, so that no two products share a score. The full method is public.
| Price (20%) | 6.0/10 |
|---|---|
| Power control (15%) | 8.5/10 |
| Eye protection in the box (15%) | 1.0/10 |
| Training and support in the price (15%) | 4.0/10 |
| Warranty (15%) | 8.5/10 |
| Portability (10%) | 8.9/10 |
| Return window, minus restocking fees (5%) | 8.0/10 |
| Where it is built and safety certification named by the brand (5%) | 5.0/10 |
How much is the Everlinx EVERARC R Series, and where do you buy it?
$1,999 on Everlinx's own US store on November 13, 2026. Regular price in Everlinx's catalog on November 13, 2026. That day Everlinx advertised $150 off "eligible welders and welder bundles", "No code needed": check on the page whether it applies to the R Series.
If that is more than you planned, the Everlinx EVERARC + EVERSHIELD costs $1,749 and scores 9.2/10. We link to the brand's store because that is where we read the price and the stock.
What should you ask Everlinx first?
- How long does a full charge take, and can the welder run while it charges?
- What does a replacement battery cost, and is the battery covered for the full 3 years?
- Is 1,500 welds measured at a given joule setting?
- Can I upgrade a corded EVERARC to the R Series later?
What should you compare it with?
The two welders closest in price: Everlinx EVERARC + EVERSHIELD ($1,749, 9.2/10) and Sunstone Zapp Plus 2 ($1,699, 9.0/10). Put all three side by side.
Head-to-heads: Everlinx EVERARC vs Everlinx EVERARC R Series. Its closest rivals, compared with each other: Sunstone Zapp Plus 2 vs Sunstone Zapp.
Rankings with this welder: permanent jewelry welders, all ranked, permanent jewelry machine, mobile permanent jewelry.
Guides that mention it or help you decide: how much does it cost to start.
Where do these figures come from?
- everlinxjewelry.com/products/everarc-r-series-rechargeable-per…, read November 13, 2026
- everlinxjewelry.com/products/permanent-jewelry-starter-kit, read November 13, 2026
- everlinxjewelry.com/policies/refund-policy, read November 13, 2026
We compare what brands publish: this isn't safety, legal or financial advice, and it promises no income.
